Hostaform C9021 TF
Acerca de este producto
Hostaform C9021 TF
C9021 TF
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNS, 02-002 POM copolymer Injection molding type, modified with PTFE; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation; for sliding combinations with very low coefficient of friction. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB, temperature index UL 746 B electrical 105 deg C, mechanical 95 deg C (tensile impact) and 100 deg C (tensile). Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: For sliding combinations with very low coefficient of friction. FMVSS = Federal Motor Vehicle Safety Standard (USA) UL = Underwriters Laboratories (USA)
Especificaciones
No se enumeran especificaciones para este producto.
Technical Properties
| Brand | Hostaform |
| Producer | Celanese |
| Polymer Type | POM COPO |
| Filler | 0% PTFE Fiber |
| Form | Granules |
| Technology | Injection Moulding |
| Características | Drinking Water Contact Acceptable • Lubricated, PTFE • Alkali Resistant • Chemical Resistant • Friction, Low • Solvent Resistant • Hydrolysis Resistant • Fuel Resistant |
| Quality | Prime |
| Density (g/cm³) | 1.51 |
| Flow Rate (g/10 min) | - |
| Flame Rating | HB(3.2 mm) |
| Notched Izod Impact ASTM 256 (J/m) | - |
| Notched Izod Impact ISO 180 (kJ/m²) | - |
Documentos relacionados
© 2025 Entec Polymers. Todos los derechos reservados.
