Pinnacle 4150H
About This Product
Pinnacle 4150H
4150H
55 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING
Pinnacle Polymers Polypropylene 4150H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.
This product is intended for thin-wall injection molding of housewares, industrial applications and consumer products requiring superior impact properties. Its high melt flow allows for quick filling of molds. Contains nucleator and antistat.
It is characterized not only by its easy mold flow, but also high impact at both room and sub-ambient conditions.
The 4150H product provides:
- Ultra high impact
- Superior balance of stiffness and impact strength
- Very high melt flow
- Fast cycle-time
Pinnacle's 4150H polypropylene as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form is covered under US FDA Food Contact Notification 864. As such, this polymer complies with the requirements of CFR Title 21 and can be used in contact with all food types under Conditions of Use A-H.
Specifications
No specifications are listed for this product
Request Quote
Technical Properties
| Brand | Pinnacle |
| Producer | Pinnacle Polymers |
| Polymer Type | PP COPO |
| Filler | Unfilled |
| Form | Granules |
| Technology | Injection Moulding |
| Features | Food Contact Acceptable • Antistatic • Nucleated • Low Temperature Impact Resistance • Flow, High • Impact Resistance, Ultra High • Impact Copolymer |
| Quality | Prime |
| Density (g/cm³) | 0.900 ASTM D1505 |
| Flow Rate (g/10 min) | 55(230°C/2.16 kg) ASTM D1238 |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | > 530(23°C, 3.20 mm, Injection Molded) ASTM D256 |
Related Documents
© 2025 Entec Polymers. All rights reserved.
