Dow HDPE DPDA-3220 NT 7
About This Product
Dow HDPE DPDA-3220 NT 7
DPDA-3220 NT 7
Dow DPDA-3220 NT 7 High Density Polyethylene Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: Dow DPDA-3220 NT 7 High Density Polyethylene Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy.
Rotational molding or injection molding
For Large Agricultural Tanks, Intermediate Bulk Containers, Potable Water, Chemical Tanks and Industrial Products
Excellent impact strength, stress crack resistance and processability
Complies with:
U.S. FDA 21 CFR 177.1520 (c)3.1a
Canadian HPFB No Objection
European Commission Regulation (EU) No 10/2011
Consult the regulations for complete details.
Specifications
No specifications are listed for this product
Request Quote
Technical Properties
| Brand | Dow HDPE |
| Producer | Dow |
| Polymer Type | HDPE |
| Filler | Unfilled |
| Form | Unknown |
| Technology | Injection Moulding • Rotomoulding |
| Features | - |
| Quality | Prime |
| Density (g/cm³) | 0.942 |
| Flow Rate (g/10 min) | 2.0(190°C/2.16 kg) |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
Related Documents
© 2025 Entec Polymers. All rights reserved.
