Affinity EG 8100G
Acerca de este producto
Affinity EG 8100G
EG 8100G
General purpose plastomer
Excellent impact properties in blends with polypropylene and polyethylene
Highly flexible with good elastic recovery
High clarity
Breathable (high O2 and CO2 transmission rates)
Low temperature sealability
Complies with U.S. FDA FCN 424 (See NOTES 1)
Consult the regulations for complete details. (See NOTES 2)
AFFINITY* EG 8100G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is a general purpose ethylene-octene copolymer exhibiting high flexibility and elasticity. AFFINITY EG 8100G can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance clarity, sealability and toughness of the structure.
Complies with:
CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS)
EU No 10/2011
U.S. FDA FCN 424
Consult the regulations for complete details.
Especificaciones
| DMF | Unspecified Rating |
|---|---|
| EU | No 10/2011 |
| FDA | 21 CFR 176.170(c), Table 2 |
| FDA | FCN 424 |
| JHOSPA | Unspecified Rating |
Propiedades técnicas
| Brand | Affinity |
| Producer | Dow |
| Polymer Type | POP |
| Filler | Unfilled |
| Form | Granules |
| Technology | Extrusion Blown Film |
| Características | Clarity, High • Impact Resistance, High • Flexibility, High • Food Contact Acceptable • Octene Comonomer • Low Temperature Heat Sealability • General Purpose • Heat Sealable |
| Quality | Prime |
| Density (g/cm³) | 0.870 |
| Flow Rate (g/10 min) | 1.0(190°C/2.16 kg) |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
Documentos relacionados
Empresa de Grupo Ravago
© 2025 Entec Polymers. Todos los derechos reservados.