Fusabond E100
About This Product
Fusabond E100
E100
FUSABOND™ E100 is an anhydride modified high density polyethylene, mainly intended for use as a component in a blend with other polymers including polyolefins and polyamides. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. Available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins.
Uses
Polymer Modifier
Composition
High% By Weight Maleic Anhydride
Graft levels are defined as:
Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0%
Specifications
No specifications are listed for this product
Technical Properties
| Brand | Fusabond |
| Producer | Dow |
| Polymer Type | HDPE |
| Filler | Unfilled |
| Form | Unknown |
| Technology | Extrusion (undefined) • Extrusion Blown Film |
| Features | - |
| Quality | Prime |
| Density (g/cm³) | 0.954 0.954 |
| Flow Rate (g/10 min) | 2.0(190°C/2.16 kg) 2.0(190°C/2.16 kg) |
| Flame Rating | - |
| Notched Izod Impact ASTM 256 (J/m) | - |
| Notched Izod Impact ISO 180 (kJ/m²) | - |
Request quote
Contact our local office for quotes on this product.
Related Documents
Ready to get started?
© Entec Polymers. All rights reserved.
